White Paper

Profit Sharing Allocation Methods - The Better Part of Discretion


May. 13, 2020

Large body text: Most Profit Sharing/401(k) Plan sponsors have the basic understanding that the plan contributions must not discriminate in favor of the owners and other highly paid participants over non-owners and non-highly paid participants. Many business owners interpret this to mean “I can’t contribute more for myself than I do for my employees.” In a general sense, this is true. But in a more specific sense, there is flexibility in the way a profit sharing contribution can be allocated to different groups or classifications of employees. Certain methods will better enable the business owner to control the cost of allocations to non-owners, while preserving desired allocations for owners and other executives.

A Profit Sharing Plan is a Defined Contribution (DC) Plan that allows the plan sponsor (i.e., the employer) to choose each year whether or not to make a contribution. The choice is presumably driven by the year’s profitability, and in fact years ago employers could only make contributions out of net profits. But profit sharing contributions no longer need to be made out of net profits and there are many reasons why an employer may choose to make, or not make, a profit sharing contribution.

While the employer has discretion over making a profit sharing contribution, the method of allocating each plan participant’s share of any contribution made must be specified in the Plan Document. There are numerous allocation methods than can be used, but the four basic methods are:

  1. Salary Ratio
  2. Integration (or Permitted Disparity)
  3. Age-Weighted
  4. New Comparability

Once specified in the plan document, the allocation method can only be changed by a plan amendment or restatement. Also specified in the plan document are the requirements to share in allocations of the profit sharing contribution for the given year. Once participants accrue the right to share in allocations of the profit sharing contribution, they also accrue the right to the allocation method stated. This means that if the allocation method is changed via plan amendment after only a single participant has already accrued the right to the original allocation method, the change cannot take place until the next plan year, unless the change results in equal or greater allocations to all.

Watch on-demand: Cash Balance and 401(k) Combination Plan Design Case Study

Learn how a combination of cash balance and 401(k) plans can help business owners increase annual tax-advantaged retirement savings.

Watch now

Comparable Doesn’t Mean Equal

IRC §401(a)(4) states that “A trust created or organized in the United States and forming part of a stock bonus, pension, or profit sharing plan of an employer for the exclusive benefit of his employees or their beneficiaries shall constitute a qualified trust under this section […] if the contributions or benefits provided under the plan do not discriminate in favor of highly compensated employees1[…].”

In the case of a DC Plan this means that either:

  1. Allocation rates for Highly Compensated Employees (HCEs) must be equivalent to allocation rates for Non-Highly Compensated Employees (NHCEs), or
  2. Benefits for HCEs derived from the projection of allocation rates to a stated age must be equivalent to such benefits derived for NHCEs at that same age.

Later on we’ll learn that comparable projected future benefits may not translate to equal present-day allocation rates.

Non-Discrimination Requirements

Federal Tax Regulation §1.401(a)(4) prescribes that non-discrimination be demonstrated with either a safe harbor approach, or a rate group testing approach known as the General Test. The easiest way a profit sharing contribution can demonstrate non-discrimination is to use a safe harbor approach. A safe harbor approach can be either design-based or non-design based. A design-based safe harbor plan is designed to demonstrate non-discrimination with a uniform method of allocating contributions. Examples of uniform allocation methods2 are:

  • Uniform Percentage of Pay (also known as Salary Ratio)
  • Uniform Dollar Amount
  • Integration

A non-design based safe harbor plan is eligible for an abbreviated testing approach, due to being designed in a way that is less likely to be discriminatory than a more aggressive allocation method. The only non-design based safe harbor profit sharing allocation method allowed is the Uniform Points method.

When a safe harbor approach cannot be used to demonstrate non-discrimination, then the plan must undergo the General Test. The General Test can be applied on either a contributions or benefits basis. Cross-Testing occurs in a DC Plan when an allocation method is tested for non-discrimination on the basis of benefits in the future derived from allocations in the present. Examples of profit sharing allocation methods that must demonstrate non-discrimination by satisfying the General Test are the Age-Weighted and New Comparability methods.

For purposes of this white paper, we will not consider the Uniform Dollar and Uniform Points methods because they are not commonly used in the small to mid-sized plan market. To understand how the four basic allocation methods impact an employer, a case study is appropriate. Let’s use the following census of a small business.

Table 1: Sample Census

Title Age Date of Hire W2 Pay
Owner 55 01/01/1990 $285,000
Salesman 46 01/01/2000 $125,000
Assistant 36 01/01/1995 $50,000
Clerical 61 01/01/2009 $25,000

The Salary Ratio Method

The owner is approaching retirement, and has not been able to save appreciably because every penny he’s earned has gone to fund his children’s education and weddings, or has been invested back into his business. He would like to start a Profit Sharing Plan and he wishes to maximize his annual allocations. In 2020, the maximum individual addition limit in a Profit Sharing Plan is $57,000. Under the Salary Ratio method, the first year allocations to the plan are shown in Table 2 below.

Table 2: Salary Ratio Profit Sharing

Title W2 Pay PS % PS $
Owner $285,000 20% $57,000
Salesman $125,000 20% $25,000
Assistant $50,000 20% $10,000
Clerical $25,000 20% $5,000
Owner Total $56,000
Non-Owner Total $40,000
Grand Total $97,000
Percent to Owner 58%

Analysis by Manning & Napier

Upon review of the Salary Ratio method, the owner’s allocation is maximized, but the same allocation percentage is applied to all the participants. Indeed, only 58% of the total contribution attributes to the owner. Many owners will not want to spend so much on the employees and will wonder if the employee cost can be reduced while maintaining the owner’s $57,000 allocation.

The Integration Method

To approach the owner’s goal, one might consider using an Integration approach. Also known as Permitted Disparity, the Integration method is a way of recognizing compensation earned in excess of a percentage of the Taxable Wage Base (TWB). In 2020, the TWB is $137,700. Integration is considered a uniform allocation (i.e., design-based safe harbor) method because it takes into consideration that the Social Security system favors employees that earn amounts under the TWB. Applying the Integration method to our sample census yields the results illustrated in the Table 3 below.

Table 3: Integrated Profit Sharing

Title W2 Pay PS % PS $
Owner $285,000 20.0% $57,000
Salesman $125,000 17.5% $21,660
Assistant $50,000 16.7% $8,344
Clerical $25,000 16.7% $4,172
Owner Total $57,000
Non-Owner Total $34,176
Grand Total $91,176
Percent to Owner 63%

Analysis by Manning & Napier

Here you can see that the cost for non-owners is reduced to $34,176 (from $40,000 using Salary Ratio), while the owner’s allocation remains at $57,000. Still, many business owners will note that the employee cost remains high under this method, and that the percentage of the overall contribution attributing to the owner is not ideal. For more details regarding the specific calculations involved with the Integration method, consult the Appendix at the end of this paper.

Cross-Testing

In order to reduce non-owner cost even further, while maintaining the maximum allocation for the owner, one must employ non-safe harbor methods that demonstrate non-discrimination by passing the General Test mentioned previously. The two most common non-safe harbor allocation methods are the Age-Weighted and New Comparability methods. Among the two, New Comparability has become the most ubiquitous. Because allocations under these methods are not uniform, both methods must be cross-tested. In order to pass the General Test using cross-testing, projected future benefits derived from present-day allocations to NHCE participants must be comparable to projected future benefits derived from present-day allocations to HCE participants.

On a benefits basis, the General Test works like this… assume two participants - the owner, age 55 and his assistant, age 30. If the testing age is 65, the owner has ten years to go while the assistant has 35 years. If, using the same interest rate and mortality assumptions, both owner and assistant are to receive comparable benefits at age 65, the lump sum accumulations required to pay those benefits must also be comparable. In order to accumulate comparable lump sums at age 65, using the same interest and mortality assumptions, the annual allocations for the owner need to be much larger than those of the assistant because the owner only has ten years of accumulation (versus 35 years for the assistant). This is essentially how older participants under cross-tested plans will typically be allowed larger allocations than younger participants.

The Age-Weighted Method

Under the Age-Weighted method, the employer’s profit sharing contribution is allocated in a manner that considers both the participant’s age and compensation. Using one of the mandated mortality tables and interest rates4, points are allocated to each participant based on age. The ratio of a participant’s points to the total points of all participants determines the participant’s percent of the overall profit sharing contribution. Table 4 shows us how the Age-Weighted method works for our sample census.

Table 4: Age-Weighted Profit Sharing

Title W2 Pay PS % PS $
Owner $285,000 20.0% $57,000
Salesman $125,000 9.6% $11,997
Assistant $50,000 4.2% $2,122
Clerical $25,000 29.4% $7,343
Owner Total $57,000
Non-Owner Total $21,462
Grand Total $78,462
Percent to Owner 73%

Analysis by Manning & Napier

The reader can see that the Age-Weighted allocation method succeeds in reducing the cost for non-owners from $34,176 to $21,462. Also, the owner’s allocation remains at the $57,000 level, reaching 72% of the entire contribution. However, there is one result that most employers will want to avoid. The participant labeled “Clerical” is a relatively new hire and has less seniority than the other participants. But because “Clerical” is older than the others, the allocation method gives her a dollar amount allocation that is much larger than that of the “Assistant.” Additionally, “Clerical” is receiving a higher percentage of pay allocation than anyone in the census.

The owner may foresee difficulty in explaining this to the participants should they discover the issue. For more details regarding the specific calculations involved with the Age-Weighted method, consult the Appendix at the end of this paper.

The New Comparability Method

This brings us to the last rung on the evolutionary ladder of allocation methods—New Comparability. The New Comparability allocation method allows the employer to split its census up into groups, and to assign different allocation percentages to each group. It is less likely to pass the General Test on an allocations basis and more likely to pass on a Cross-Tested basis. Classifications may be defined in a number of ways, the most common of which is by job title. Classifications may also be based on the employer’s different geographic locations, subsidiaries, employee types (i.e., union vs. non-union or hourly vs. salaried), and other similar bona fide business criteria. Examples of classifications by job title are shown in Table 5.

Table 5: Sample Group Titles

1. Owners 2. Non-Owners
1. Sr. Partners 2. Jr. Partners 3. All Other Employees
1. Executives 2. Managers 3. All Other Employees

Similarly, classes can be defined for each single participant. Applying a two-group New Comparability approach to our sample census, such that the Owner is in Group 1 and Non-Owners (i.e., all other employees) are in Group 2 produces the results shown in Table 6.

Table 6: New Comparability Profit Sharing

Title W2 Pay PS % PS $
Owner $285,000 20.0% $57,000
Salesman $125,000 5% $6,250
Assistant $50,000 5% $2,500
Clerical $25,000 5% $1,250
Owner Total $56,000
Non-Owner Total $10,000
Grand Total $6,700
Percent to Owner 85%

Analysis by Manning & Napier

Here, we can see that the non-owner cost is reduced to only $10,000. This represents a 53% reduction over the Age-Weighted design, a 71% reduction over the Integrated design, and a 75% reduction over the Salary Ratio design.

Lastly, 85% of the plan contribution attributes to the owner. Of all the methods explored, the New Comparability method provides the most flexibility for the employer concerned with providing a maximum allocation to the owners while minimizing the employer’s cost on non-owners.

There are additional considerations surrounding the use of the New Comparability method that employers should be aware of. These important details are discussed in the Appendix at the end of this paper.

Conclusion

A profit sharing contribution must demonstrate non-discrimination in either the form of allocations or benefits. Giving all participants the same percentage of pay as an allocation is clearly non-discriminatory. However, giving each participant the same theoretical retirement benefit is also non-discriminatory and the present-day allocations required to generate these benefits may not be equal. This is because older participants have less time to retirement, and thus require larger allocations to reach the same benefit level. Certain design-based safe harbor allocation methods like the Salary Ratio and Integration methods are deemed to be non-discriminatory. Non-safe harbor allocation methods like the Age-Weighted and New Comparability methods must demonstrate non-discrimination by passing the General Test on either an allocations basis or on a benefits basis. When an allocation method passes the General Test on a benefits basis, this is known as Cross-Testing.

For existing plans, the allocation method can only be changed by a plan amendment or restatement. The plan document will specify the requirements participants must satisfy in order to share in allocations of the profit sharing contribution for the given year. Once participants accrue the right to share in allocations, the right to the allocation method stated is also accrued and cannot be taken away. In order to change the allocation method for a given year, the plan must be amended prior to the point at which participants satisfy the allocation requirements specified in the plan document.

In considering a Profit Sharing Plan, including 401(k), employers will benefit from the study of how the various allocation methods will apply to the census of its employees. Employers desiring to treat all participants equally from an allocations perspective, and only wishing to control cost by the amount of the overall contribution will benefit most by the Salary Ratio and Integration methods. Employers seeking to make age the chief driver in the overall allocation percentage will benefit from the Age-Weighted approach. Employers seeking the maximum flexibility in minimizing cost on certain participant classifications while maximizing allocations to certain key owners and executives will benefit the most by the New Comparability allocation method.

We're here to help

We're always available if you'd like to schedule a call with a member of our team to talk about the current environment, solutions we offer, or other questions top of mind for you.

Schedule a call

Appendix

Calculation Detail—Integration Method

To use the Integration method, an Integration Level must be chosen. The Integration Level is a percentage or portion of the TWB, and is specified in the plan document. Under the Integration method, a Base Percentage is applied to total compensation, and an Excess Percentage is applied to compensation over the Integration Level. The disparity is the difference between these two percentages. As you might expect, regulations limit the Maximum Disparity Allowance, which is defined to be the lesser of a Maximum Disparity Percentage, or the Base Percentage. The Maximum Disparity Percentage depends on the Integration Level (i.e., the percentage of the TWB) in effect at the beginning of the plan year. The Maximum Disparity Percentage is determined under the following table3.

Table 7: Maximum Disparity by Integration Level

Integration Level Maximum Disparity Percentage
TWB 5.7%
More than 80% but less than 100% of TWB 5.4%
The greater of $10,000 or 20% of TWB, but less than 80% of TWB 4.3%
Less than the greater of $10,000 or 20% of TWB 5.7%

The cumulative effect of applying these percentages to compensation below and above the TWB generally results in higher overall allocations to HCEs. The Integration Level chosen in the example is “80% of TWB plus $1” (or $110,161 in 2020). For individuals with compensation that is well above the TWB, this specific Integration Level is often chosen to maximize the effect. The reason is that the Maximum Disparity Percentage of 5.4% is applied to a larger piece of excess compensation.

The calculation of allocations under the Integration method works as follows. Beginning with the Owner, we note that his total compensation is $285,000 and the Integration Level is $110,161. This means his compensation in excess of the Integration Level is $174,840. Based on Table 7, and our chosen Integration Level, the Maximum Disparity Percentage is 5.4%. Thus this amount can become our Excess Percentage and 5.4% of the excess compensation ($174,840) is $9,441. Since we are seeking a maximum allocation of $57,000 for the owner, we need a Base Percentage that yields a base allocation equal to $47,559 ($57,000 - $9,441). This Base Percentage is the result of dividing $47,559 by $285,000, and is 16.7%. Now that we have a Base Percentage (16.7%) and an Excess Percentage (5.4%), we can see how the allocations in the table are determined, rounded to the nearest dollar. Essentially, each participant first receives an allocation of 16.6% of total compensation. Then, any participant with compensation in excess of the Integration Level ($110,161) receives an additional allocation of 5.4% on that excess compensation.

Calculation Detail—Age-Weighted Method

To properly conduct an Age-Weighted profit sharing allocation, actuarial factors specific to the interest rate and mortality table specified in the Plan Document are required. In our example, we have chosen an interest rate of 8.5% and the Unisex Pensioners 1984 mortality table. The actuarial factor is based on the number of years from the end of the plan year to the retirement age stated in the Plan Document, which is assumed to be the greater of age 65 or five years of participation. The actuarial factor for each participant is multiplied by that participant’s compensation, to arrive at a number of points. After each participant’s points are calculated, they are added together for a total number of points. Then, each participant’s points are divided by the total number of points to arrive at the percentages shown in Table 8.

Table 8: Age-Weighted Points

Name Pay Actuarial Factor Points Percent of Total Points
Owner $285,000 .038144 10,871.04 72.6464%
Salesman $125,000 .018304 2,288 15.2897%
Assistant $50,000 .008096 404.8 2.7051%
Clerical $25,000 .056019 1400.475 9.3588%

Analysis by Manning & Napier

These percentages can then be applied to a plan level profit sharing dollar amount if known. Or, as is typical, we can back into a minimum total profit sharing amount necessary to reach the $57,000 maximum (2020) for the Owner. To find this amount we simply divide $57,000 by the Owner’s point percentage of 72.6464%. Doing this yields a total profit sharing dollar amount of approximately $78,463. Applying each participant’s point percentage to this total profit sharing amount yields the allocations shown in Table 4.

Age-Weighted plans usually satisfy the General Test on a benefits basis with little difficulty. The reason is that allocating the contribution using normalization factors as done above will generally produce the same equivalent benefit rate for all participants.

Important Details about the New Comparability Method

Care must be taken when using the New Comparability method in an IRS approved Prototype Plan Document versus a Volume Submitter Plan Document. In a Prototype document, the number of allocation rates is limited5. Firstly, the number of allocation rates for HCEs cannot exceed the number of eligible HCEs, and in no case can exceed 25. Secondly, the maximum number of allocation rates for NHCEs is 25. But the actual limit for NHCEs is based on the number of eligible NHCEs and may be lower as described below.

Table 9: Prototype Plan Allowable Allocation Rates

Eligible NHCEs Maximum Allocation Rates
2 or less 1
3 – 8 2
9 – 11 3
12 – 19 4
20 – 29 5
30 or more 6 – 25

When there are more than 30 NHCEs, the number of allocation rates allowed is calculated by dividing the number of eligible NHCEs by 5 and then rounding-up to the nearest whole number. So in order to be allowed 25 allocation rates, a Prototype plan must benefit at least 125 eligible NHCEs. These limits on the number of allocation rates do not apply to Volume Submitter documents. However, IRS standards of reasonableness always apply, particularly with issues such as deemed Cash or Deferred Arrangements for self-employed persons, and classifications that limit participation to shortest-service and lowest-paid employees while excluding other NHCEs.

As mentioned above, the New Comparability method will not normally pass the General Test on an allocations basis. But in order to gain entrance to the General Test on a benefits basis, certain preconditions, known as the Gateway Test, apply. To satisfy the Gateway Test the Minimum Allocation Gateway (i.e., lowest allowable allocation rate) for any benefitting NHCE is one-third of the highest allocation rate for any benefitting HCE (also known as the One-Third Test)6.

However, if every benefitting NHCE receives an allocation of at least 5%, the Minimum Allocation Gateway is deemed satisfied, and the allocation rates for HCEs are not limited, except by the individual addition limit under IRC §415(c) ($57,000 in 2020)7.

The Minimum Gateway Allocation requirement can be avoided if each allocation rate provided can meet the Broadly Available Test8. This test is met if each allocation rate is available to a group of participants who, if treated as benefitting under a separate plan, could satisfy certain non-discriminatory classification requirements under Treasury Regulation §1.410(b)-4. Since most plans will opt for the Minimum Allocation Gateway, these additional requirements won’t be addressed herein.

Imputing Permitted Disparity

Similar to the disparity permitted under a design-based safe harbor allocation method (i.e., Integration), Permitted Disparity may also be imputed for a non-safe harbor plan that relies on the General Test to demonstrate non-discrimination. A detailed explanation of this imputation is beyond the scope of this paper. Simply though, allocation rates or benefits rates (when cross-testing) are adjusted within allowable limits to reflect employer provided Social Security benefits. Oftentimes, a cross-tested allocation may be very close to passing the General Test, but not close enough. Imputing Permitted Disparity is a technique that can be employed to push the allocation into passing.

It’s important to recognize that regulations prevent the employer from double-dipping, by limiting the multiple use of Permitted Disparity in the same year for the same employees, in different plans9. For example, if the employer uses the Integration method in a sponsored Profit Sharing Plan, then the employer is limited in the amount of imputed disparity used in any other plan (i.e., a Defined Benefit Plan) on the same employees to pass the General Test. Similarly, if an employer imputes Permitted Disparity in the General Test of one plan, then that employer is limited in the level of Integration used in another sponsored plan’s allocation method.

Sources: 2019 ERISA Outline Book; Internal Revenue Code; Treasury Regulations; IRS LRM 94

1The code defines precisely what is meant by the phrase Highly Compensated Employee (HCE). Under IRC §414(q)(1), an employee is an HCE for a plan year if: 1) The employee owns more than 5% of the employer (or a related employer) at any time during the current or prior plan year. If the employee’s highest ownership percentage during this period is more than 5%, the test is satisfied. Family attribution rules apply (IRC §318); or 2) The employee’s compensation for the prior plan year is more than a prescribed dollar amount subject to annual cost-of-living increases.

2IRC §401(l), Treasury Regulation §1.401(a)(4)-2(b).

3Treasury Regulation §1.401(l)-2(d)

4The interest rate used must be between 7.5% and 8.5%

5IRS Revenue Procedure 2005-16. IRS LRM 94

6Treasury Regulation §1.401(a)(4)-8(b)(1)(vi)(A)

7Treasury Regulation §1.401(a)(4)-8(b)(1)(vi)(B)

8Treasury Regulation §1.401(a)(4)-8(b)(iii)

9Treasury Regulation §1.401(l)-5(b)

Want regular insights into financial planning and investing-related topics?

Subscribe

Share

Sign up to receive the latest financial planning and investment tips and news.

View all Preferences